| Abstract: | A method for the evaluation of p–n junction cell temperature in PV modules operating in the maximum power point (MPP) mode has been proposed. The method does not require specialized equipment and (for the concentrator modules) the data on the open circuit (OC) voltage temperature coefficients measured under pulse illumination. It consists of measuring several open circuit voltage magnitudes together with temperature measurements on the external module surface near one of the cells. In this procedure, a fast transition from MPP to OC operational mode is carried out, during which a time‐dependent voltage measurement is carried out with the help of a memory oscilloscope. A “reference” OC voltage magnitude in a “cold” module (a condition, as if the cells are kept at ambient temperature) is obtained by calculations, so that there is no necessity in a fast mechanical shuttering of the module aperture area. In the case of the concentrator modules, the module OC voltage temperature coefficient can be measured, if heat sinking process is artificially modified during outdoor measurements. Copyright © 2015 John Wiley & Sons, Ltd. |
