首页 | 本学科首页   官方微博 | 高级检索  
     

填充介质倒梯形脊波导截止特性的有限元分析
引用本文:李建兵,陈小强,高原.填充介质倒梯形脊波导截止特性的有限元分析[J].光通信研究,2011(5):42-44,63.
作者姓名:李建兵  陈小强  高原
作者单位:兰州交通大学自动化与电气工程学院;
基金项目:甘肃省教育厅硕导项目(20872)
摘    要:为了寻找最佳截止特性的填充介质脊波导结构,提出了填充介质倒梯形对称双脊波导.采用有限元法借助MATLAB软件计算了填充介质倒梯形对称双脊波导在TE模式下的截止特性,即主模截止波长和单模带宽.绘制出主模场结构图,并分析脊波导截止特性与填充介质相对介电常数之间的关系,给出了关系曲线图.这些结果将对填充介质波导的设计和工程应...

关 键 词:截止特性  填充介质波导  有限元法  脊波导  单模带宽

Finite element analysis of the cutoff characteristics of dielectric-loaded inverted trapezoid ridge waveguides
Li Jianbing,Chen Xiaoqiang,Gao Yuan.Finite element analysis of the cutoff characteristics of dielectric-loaded inverted trapezoid ridge waveguides[J].Study on Optical Communications,2011(5):42-44,63.
Authors:Li Jianbing  Chen Xiaoqiang  Gao Yuan
Affiliation:Li Jianbing,Chen Xiaoqiang,Gao Yuan(School of Automation and Electrical Eng.,Lanzhou Jiaotong Univ.,Lanzhou 730070,China)
Abstract:In order to find a dielectric-loaded inverted trapezoid ridge waveguide with the optimum cutoff characteristics,a dielectric-loaded inverted trapezoid symmetrical dual-ridge waveguide is presented.Its cutoff characteristics in the TE mode,i.e.the cutoff wavelength of the main module and single-mode bandwidth,are calculated with the help of MATLAB by using the finite element method.The dominant mode field pattern is drawn,the relationship between the cutoff characteristics and the relative dielectric constan...
Keywords:cutoff characteristics  dielectric-loaded waveguide  finite element method  ridge waveguide  single-mode bandwidth  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号