首页 | 本学科首页   官方微博 | 高级检索  
     

刮壁浆在槽式釜的传热研究
引用本文:于鲁强,刘烨,冯连芬,王凯,许国军.刮壁浆在槽式釜的传热研究[J].化学工程,1997(5).
作者姓名:于鲁强  刘烨  冯连芬  王凯  许国军
作者单位:浙江大学聚合反应工程国家重点实验室
摘    要:针对结刮壁搅拌槽壁面的传热提出渗透-对流模型。运用在搅拌浆上安装热电偶的测温方法,考察了刮壁搅拌槽中的温度分布情况,实验结果支持了渗透-对流模型。当Re>100,Re·Pr>106时,刮壁残余层对壁面传热有明显影响,随着Re的进一步提高,刮壁槽壁面的传热系数增加缓慢,关联得到Re<100,8000<Pr<18000时刮壁槽壁面传热系数的经验关联式。

关 键 词:刮壁浆  温度分布  传热

Heat Transfer in Vessel with Scraped Surface Agitator
Yu Luqiang,Liu Ye,Feng Lianfang,Wang Kai,Xu Guojun.Heat Transfer in Vessel with Scraped Surface Agitator[J].Chemical Engineering,1997(5).
Authors:Yu Luqiang  Liu Ye  Feng Lianfang  Wang Kai  Xu Guojun
Abstract:An penetration-convection model was presented for the heat transfer of the vessel with the scraped surface agitator in this paper.The temperature distribution in the vessel was investigated by the thermocouples fixed on the shaft of the agitator.The model was supported by the experimental results.As Re>100,Re·Pr>10 6,the residual film had a great influence on the heat transfer of the vessel.The heat transfer coefficient had a little increase with increase of Re.An empirical correlation of the heat transfer coefficient on the scraped vessel wall has been obtained for Re<100,8000<Pr<18000.
Keywords:scraped  surface agitator  temperature distribution  heat transfer  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号