| 频率步进与脉冲多普勒复合兼容性设计 |
| |
| 引用本文： | 林德福,沈吉,张伟 祁载康.频率步进与脉冲多普勒复合兼容性设计[J].电子学报,2006,34(B12):2410-2413. |
| |
| 作者姓名： | 林德福 沈吉 张伟 祁载康 |
| |
| 作者单位： | [1]北京理工大学机电控制工程系,北京100081 [2]中国电子技术标准化研究所,北京100007 |
| |
| 基金项目： | 国家“十五”重点预研项目（No.413010404） |
| |
| 摘 要： | 研究基于圆锥扫描体制下，频率步进与脉冲多普勒（PD）复合的兼容性设计．从理论上分析了频率步进与脉冲多普勒信号的选择方法，探讨了两种体制转换的工程算法及其实现，并通过外场试验对毫米波导引头系统在频率步进和脉冲多普勒模式下分别对静止目标和运动目标的最大作用距离与圆锥扫描测角进行实验验证，结果表明频率步进与脉冲多普勒复合体制下的静动目标距离分辨与测角是可行的．
|
| 关 键 词： | 频率步进 脉冲多普勒 圆锥扫描 |
| 文章编号： | 0372-2112（2006）12A-2410-04 |
| 收稿时间： | 2006-05-26 |
| 修稿时间： | 2006-05-262006-08-01 |
Design of Compatibility of Stepped Frequency and Pulse Doppler |
| |
| LIN De-fu, SHEN Ji, ZHANG Wei, QI Zai-kang.Design of Compatibility of Stepped Frequency and Pulse Doppler[J].Acta Electronica Sinica,2006,34(B12):2410-2413. |
| |
| Authors: | LIN De-fu SHEN Ji ZHANG Wei QI Zai-kang |
| |
| Affiliation: | 1. School of Mechano-Electronics Engineering, Beifing Institute of Technology, Beijing 100081, China ; 2. China Electronics Standardization Institute, Beijing 100007, China |
| |
| Abstract: | The compatibility of the stepped frequency mode and pulse Doppler mode has been studied based on the conical scanning system. The signal selection between stepped frequency and pulse Doppler was analyzed in theory. The arithmetic and the application of the conversion between the two systems were discussed. Outside test was validated about high rang resolution and an- gle measure of MMW seeker under the composite system of stepped frequency and pulse Doppler. The result shows that the high rang resolution and angle detect for rest and move target is feasible based on the composite system of stepped frequency and pulse Doppler. |
| |
| Keywords: | stepped frequency pulse Doppler conical scanning |
| 本文献已被 维普 等数据库收录！ |
