| 多层薄壁零件冷挤压模设计 |
| |
| 引用本文： | 田福祥.多层薄壁零件冷挤压模设计[J].模具工业,2004(9):43-45. |
| |
| 作者姓名： | 田福祥 |
| |
| 作者单位： | 青岛理工大学,山东青岛,266033 |
| |
| 摘 要： | 介绍的多层薄壁零件冷挤压模 ,采用镶套式组合凸、凹模和浮动凹模结构 ,不仅解决了型腔制造和工件脱模的困难 ,而且改善了模具的填充、排气性能
|
| 关 键 词： | 组合凸、凹模 冷挤压 薄壁零件 浮动凹模 |
| 文章编号： | 1001-2168(2004)09-0043-03 |
| 修稿时间： | 2003年11月6日 |
Design of the Cold Extruding Die for Multi-layer Thin-wall Components |
| |
| TIAN Fu-xiang.Design of the Cold Extruding Die for Multi-layer Thin-wall Components[J].Die & Mould Industry,2004(9):43-45. |
| |
| Authors: | TIAN Fu-xiang |
| |
| Abstract: | The cold extruding die for forming the multi-layer thin-wall components is introduced.By adopting the structures of inserted and combined punch and matrix and floating matrix,not only the difˉficulties in forming the cavities and stripping the component have been solved,but also the filling and venting performances of the die are improved. |
| |
| Keywords: | combined punch and matrix extrusion thin-wall component floating matrix |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
