| 钼精矿焙砂压力成型的工艺过程研究 |
| |
| 引用本文： | 杨永斌,李宏煦,姜涛,乐国彪,黄柱成.钼精矿焙砂压力成型的工艺过程研究[J].中国钼业,1997(4). |
| |
| 作者姓名： | 杨永斌 李宏煦 姜涛 乐国彪 黄柱成 |
| |
| 作者单位： | 中南工业大学矿物工程系 |
| |
| 摘 要： | 着重研究了适合于钼精矿焙砂压力成型的原料粒度组成，提出了相应的破碎流程。此外，还就预先碾压对于成型过程的影响进行了研究，并得到了肯定的结论。采用这一工艺过程进行连续成型试验，成球系数达到８６．５％。
|
| 关 键 词： | 钼 氧化钼 压团 成形 |
STUDY ON TECHNOLOGICAL PROCESSES OF BRIQUETTING OF BAKING POWDER FROM MOLYBDENUM CONCENTRATE |
| |
| Yang Yongbin,Li Hongxu,Jiang Tao et al.STUDY ON TECHNOLOGICAL PROCESSES OF BRIQUETTING OF BAKING POWDER FROM MOLYBDENUM CONCENTRATE[J].China Molybdenum Industry,1997(4). |
| |
| Authors: | Yang Yongbin Li Hongxu Jiang Tao |
| |
| Abstract: | In this paper,the suitable granularity distribution for briquetting of baking powder from molybdenum concentrate was determined and a crushing flow was accordingly presented for experimental material.In addition,the effect of pre grinding on the briquetting process as well as on the strength of briquettes was investigated and a positive conclusion was obtained .The determined technological process is applied to the continuous briquetting test with the agglomeration ratio reaching 86.5%. |
| |
| Keywords: | Molybdenum Molybdenum oxide Briquetting Forming |
| 本文献已被 CNKI 等数据库收录！ |
