| 卧式挤压铸造设备双曲肘合模机构仿真优化设计 |
| |
| 引用本文： | 廖绪钦,邵明.卧式挤压铸造设备双曲肘合模机构仿真优化设计[J].现代制造工程,2012(1):48-51. |
| |
| 作者姓名： | 廖绪钦 邵明 |
| |
| 作者单位： | 华南理工大学机械与汽车工程学院 |
| |
| 基金项目： | 广东省教育部产学研结合重大专项项目(2009A090100026);NSFC-广东联合基金项目(U1034001) |
| |
| 摘 要： | 通过分析2500kN卧式挤压铸造设备双曲肘合模机构的工作原理,结合虚拟样机仿真软件ADAMS进行建模及仿真优化设计。以合模机构工作过程中各杆件连接点为设计变量、合模动作完成时最大合模力为目标函数进行优化设计。优化结果表明,该方法有效地提高了机构的整体性能。
|
| 关 键 词： | 挤压铸造设备 双曲肘机构 ADAMS软件 扩力比 优化设计 |
Simulation and optimization design for joint-double clamping mechanism of a horizontal squeeze casting equipment |
| |
| Liao Xuqin,Shao Ming.Simulation and optimization design for joint-double clamping mechanism of a horizontal squeeze casting equipment[J].Modern Manufacturing Engineering,2012(1):48-51. |
| |
| Authors: | Liao Xuqin Shao Ming |
| |
| Affiliation: | (School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China) |
| |
| Abstract: | By analyzing joint-double clamping unit’s working theory of the 2500kN horizontal squeeze casting equipment,virtual prototyping simulation software ADAMS were used on modeling and the optimization design.Connection point of mechanism as design variables,the maximum clamping force as the objective function.The results show that the method of the optimization design effectively improves the mechanical properties of the mechanism. |
| |
| Keywords: | squeeze casting equipment joint-double clamping unit ADAMS expanding force coefficient optimization design |
| 本文献已被 CNKI 等数据库收录！ |
