| 薄壁管液压成形计算与有限元模拟分析 |
| |
| 引用本文： | 郭永良,李卫民,孙洪哲,张丽萍,黄海龙. 薄壁管液压成形计算与有限元模拟分析[J]. 辽宁工学院学报, 2009, 0(4): 246-248 |
| |
| 作者姓名： | 郭永良 李卫民 孙洪哲 张丽萍 黄海龙 |
| |
| 作者单位： | 辽宁工业大学机械工程与自动化学院,辽宁锦州121001 |
| |
| 摘 要： | 采用塑性变形理论对薄壁管成形进行分析，计算胀形力。应用SolidWorks建立胀形模型，应用Dynaform对模型进行有限元分析，模拟在不同的胀形压力和不同的胀形速度下的成形情况。通过大量模拟，分析胀形力及胀形速度对成形的影响。
|
| 关 键 词： | 液压成形 胀形力 SolidWorks Dynaform |
Finite Element Simulation and Analysis of Thin-walled Tube Hydroforming |
| |
| GUO Yong-liang,LI Wei-min,SUN Hong-zhe,ZHANG Li-ping,HUANG Hai-long. Finite Element Simulation and Analysis of Thin-walled Tube Hydroforming[J]. Journal of Liaoning Institute of Technology(Natural Science Edition), 2009, 0(4): 246-248 |
| |
| Authors: | GUO Yong-liang LI Wei-min SUN Hong-zhe ZHANG Li-ping HUANG Hai-long |
| |
| Affiliation: | (Mechanical Engineering ＆ Automation college, Liaoning University of Technology, Jinzhou 121001, China ) |
| |
| Abstract: | The Thin-walled tube hydroforming was analysed by plastic deformation, with bulging force calculated. The bulging mode was established by using SolidWorks, the finite element was done on this model by using Dynaform. Simulating the forming situation at different bulging forces and different bulging speeds was implemented. Through substantial simulation, both the bulging forces and the bulging speeds impacting on hydroforming were all analyzed. |
| |
| Keywords: | hydroforming bulging force SolidWorks Dynaform |
| 本文献已被 维普 等数据库收录！ |
