| 盒形塑件成形工艺分析与注射模设计 |
| |
| 引用本文： | 贺平,陈明远.盒形塑件成形工艺分析与注射模设计[J].模具工业,2007,33(9):42-45. |
| |
| 作者姓名： | 贺平 陈明远 |
| |
| 作者单位： | 沈阳航空工业学院,航空宇航工程学院,辽宁,沈阳,110136;沈阳航空工业学院,航空宇航工程学院,辽宁,沈阳,110136 |
| |
| 摘 要： | 运用Pro/E软件对塑件进行实体造型,并用Moldflow软件对塑料熔体的流动、冷却管路的布局、塑件翘曲变形进行了模拟分析,确定最优成形方案。介绍了盒形塑件注射模的结构,模具结构合理,生产的塑件质量优良。
|
| 关 键 词： | 盒形塑件 注射模 模拟分析 成形工艺 |
| 文章编号： | 1001-2168（2007）09-0042-04 |
| 修稿时间： | 2007-03-24 |
Analysis on forming process and design of injection mould for box-component |
| |
| HE Ping,CHEN Ming-yuan.Analysis on forming process and design of injection mould for box-component[J].Die & Mould Industry,2007,33(9):42-45. |
| |
| Authors: | HE Ping CHEN Ming-yuan |
| |
| Affiliation: | College of Aviation and Astronavigation Engineering,Shenyang Institute of Aeronautical Engineering,Shenyang,Liaoning 110136,China |
| |
| Abstract: | The structure of an injection mould for a box-component was described. Using Pro/E software to create the solid modeling of the plastic part,and using Moldflow software to simulate and analyze the flow of plastic melt,the layout of cooling channel and the warpage of plastic box,for the purpose of designing an optimum forming process.Two cavities were arranged,and the pin-point structure and two-step parting structure were adopted in the mould,which ensures the manufacture of quality plastic boxes. |
| |
| Keywords: | box-component injection mould simulation analysis forming technique |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
