PVC Membrane Sensor for Potentiometric Determination of Atropine in Some Pharmaceutical Formulations

Abstract

The construction and general performance of a novel potentiometric membrane sensor for determination of atropine has been developed. It is based on the formation of the ion association complex of the atropinium cation with phosphotungstate counter anion as electroactive material dispersed in a PVC matrix, β‐Cyclodextrin and o‐nitrophenyl octyl ether serve as a plasticizer. The sensor shows a fast, stable, near Nernstian response for 1×10^?2 M to 1×10^?6 M atropine at 25°C over the pH range of 3–8 with a cationic slope of 51±0.5 mV/decade. The lower detection limit is 8×10^?7 M and the response time is 20–45 sec. Selectivity coefficients of atropine, relative to a number of interfering substances, were investigated. There are negligible interferences caused by most of the studied cations, anions, and pharmaceutical excipients. The direct determination of atropine shows an average recovery of 98.6% and a mean relative standard deviation (RSD) of 1.6% at 100 µg/mL. The results obtained by determination of atropine in some formulations (atropine injection and eye drops) are favorably comparable with those obtained by the British Pharmacopoeia method. The developed membrane electrode has been used as end point indicator electrode for some potentiometric titrations.