| 1基于LabVIEW的轧机厚度控制系统设计与仿真-TP273 |
| |
| 引用本文： | 张焘,金伟,张永妹,孙卫华.1基于LabVIEW的轧机厚度控制系统设计与仿真-TP273[J].工业仪表与自动化装置,2009(1):38-41. |
| |
| 作者姓名： | 张焘 金伟 张永妹 孙卫华 |
| |
| 作者单位： | [1]东北大学秦皇岛分校智能测控研究所,河北秦皇岛066004 [2]北京师范大学信息科学与技术学院,北京100875 |
| |
| 基金项目： | 河北省科学技术研究与发展指导计划项目（06212180） |
| |
| 摘 要： | 介绍了轧机厚度控制系统的设计与实现，在LabVIEW平台下实现了基于TCP／IP协议的控制系统网络和控制器的建立。以某铝箔厂1700mm轧机为研究背景提取其数学模型，在一台PC上建立该轧机的动态仿真模型（仿真机），代替现场轧机来验证控制系统。实验表明，通过这种仿真机验证的轧机厚度控制系统，如果将输入输出端口接到现场轧机中就可以完成现场任务。
|
| 关 键 词： | 轧机 厚度控制系统 仿真机 TCP/IP LabVIEW |
The design and simulation of a thickness control system for a rolling mill based on LabVIEW |
| |
| Affiliation: | ZHANG Tao , JIN Wei , ZHANG Yongmei, SUN Weihua ( 1. Institute of Intelligent Control ＆ Measurement under Northeastern University at Qinhuangdao, Hebei Qinhuangdao 066004, China ; 2. College of lnfo Sci ＆ Tech under Beijing Normal University, Beijing 100875, China) |
| |
| Abstract: | This paper presents the design and setting-up a thickness control system for a rolling mill based on the TCP/IP protocol by means of the LabVIEW platform. In order to validate the control system, a dynamic model as a simulator is built instead of a rolling mill at a worksite, which is set up on a PC based on a mathematic model for a real rolling mill in a plant. Experiments show that the control system verified by the simulator can finish the job at its working fied when its input and output signals are connected to the rolling mill in service. |
| |
| Keywords: | rolling mill thickness control system simulator TCP/IP LabVIEW |
| 本文献已被 维普 等数据库收录！ |
