| Abstract: | Surplus sludge produced during the biological treatment of wastewater requires costly disposal procedures. With increasing environmental and legislative constraints, increasing sludge production and more limited disposal options, new recycling alternatives have to be found. The possibility of obtaining activated carbons from surplus biological sludge by chemical activation with H2SO4 has been investigated. Operational parameters such as the amount of H2SO4 added, the temperature, and activation time were modified to ascertain their influence on the quality of the activated carbon obtained. The quality of the sludge‐based activated carbons was evaluated by established characterisation parameters for adsorption from solution such as phenol value, iodine number, methylene blue number and tannin value and compared with commercial activated carbons. Activation at 700 °C for 30 min in the presence of 0.5 cm3 H2SO4 g?1 dry solids in the sludge led to an activated carbon with a good capacity for iodine and tannic acid. The sludge‐derived activated carbon obtained is mesoporous in nature with a high presence of large macropores. Weak and moderate acidic surface functional groups were detected on the surface, which impart a hydrophilic nature to the solid. When compared with a commercial activated carbon, the sludge‐derived activated carbon performed better when removing dyes with a high presence of anionic solubilising groups and heavy metals. The results indicate that COD adsorption from a biologically‐treated effluent may also be an area for application. © 2002 Society of Chemical Industry |
