首页 | 本学科首页   官方微博 | 高级检索  
     

CO在负载CuCl的Cu(Ⅰ)Y型沸石分子筛吸附剂上的吸附分离
引用本文:汪贤来,周建良.CO在负载CuCl的Cu(Ⅰ)Y型沸石分子筛吸附剂上的吸附分离[J].石油化工,1994(8).
作者姓名:汪贤来  周建良
作者单位:上海化工研究院
摘    要:实测了具有不同CuCl负载量(0-2.0mmol/gMS)的Cu(Ⅰ)Y型沸石在75℃、100℃和100kPa、200kPa下对CO、CO_2和N_2的(相对)吸附量和吸附分离因数,并提出了CO在该吸附剂上的吸附平衡模型。结果表明,负载1.2-1.8mmoLCuCl/gMS的Cu(Ⅰ)Y型沸石吸附剂较未负载CuCl的Cu(Ⅰ)Y型吸附剂对CO/CO_2和CO/N_2的吸附分离因数有较大的提高,可适用于工业废气中CO的TSA和PSA分离。

关 键 词:CO,吸附分离,Y型分子筛,CuCl

Selective Adsorption Separation of CO on Adsorbent of Cu(Ⅰ)Y Type MS Carrying CuCl
Wang Xianlai and Zhou Jianliang.Selective Adsorption Separation of CO on Adsorbent of Cu(Ⅰ)Y Type MS Carrying CuCl[J].Petrochemical Technology,1994(8).
Authors:Wang Xianlai and Zhou Jianliang
Abstract:The adsorption amounts and separation factors of CO/CO_2/N_2 on Cu(Ⅰ)Y type MScarrying different amounts of impregnated CuCl were determined at 75℃,100℃ and under100kPa,200kPa Meanwhile,the adsorption equilibria models of CO on this adsorbent wereproposed. The results show that the adsorptive separation factors of CO/CO_2 and CO/N_2 onCu(Ⅰ)Y type MS impregnated with 1.2-1.8mmol CuCl/gMS are much higher than those onCu(Ⅰ)Y type MS with no impregnated CuCl.This adsorbent may be used not only for TSAseparation,but also for PSA separation Which is more important。
Keywords:adsorption separation  Y type molecular sieve  carbon monoxide  CuCl
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号