| 采用TMCP工艺生产700MPa级低碳贝氏体钢 |
| |
| 引用本文： | 于爱民.采用TMCP工艺生产700MPa级低碳贝氏体钢[J].河南冶金,2007,15(5):13-15. |
| |
| 作者姓名： | 于爱民 |
| |
| 作者单位： | 安阳钢铁集团有限责任公司技术中心 |
| |
| 摘 要： | 以微合金化结合控轧、控冷工艺生产非热处理高强度钢,本文通过对700MPa级低碳贝氏体钢轧制工艺的研制分析,制定合理的轧制工艺,成功开发出TMCP工艺下700MPa级低碳贝氏体钢
|
| 关 键 词： | 低碳贝氏体钢 TMCP工艺 力学性能 组织 |
| 收稿时间： | 2007-09-10 |
| 修稿时间： | 2007年9月10日 |
MANUFACTURE OF 700MPa GRADE LOW CARBON BAINITIC STEEL BY TMCP PROCESSING |
| |
| Yu Aimin.MANUFACTURE OF 700MPa GRADE LOW CARBON BAINITIC STEEL BY TMCP PROCESSING[J].Henan Metallurgy,2007,15(5):13-15. |
| |
| Authors: | Yu Aimin |
| |
| Abstract: | Microalloy technology combined control rolling and control cooling processing are used to manufacture non - heat treated high strength steel in this paper. Appropriate rolling process is found through development and analysis of rolling process of 700MPa grade low carbon bainitic steel. 700MPa grade low carbon bainitic steel produced by TMCP processing is developed successfully. |
| |
| Keywords: | low carbon bainitic steel TMCP processing mechanical property structure |
| 本文献已被 维普 万方数据 等数据库收录！ |
