Effect of remelting process on characterization of air-plasma sprayed Fe67.5Ni23.5B9 alloy coatings onto 1Cr18Ni9Ti stainless steel |
| |
Authors: | Wenfeng Yang Meng Li |
| |
Affiliation: | 1. Department of Automobile Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India;2. Department of Mechanical Engineering, Chandigarh University, Gharuan, Moahli, Punjab, India;3. Department of Mechanical Engineering, IKG Punjab Technical University, Kapurthala, Punjab, India;1. School of Material Science and Engineering, Central South University, Changsha 410083, China;2. Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China;3. State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing, 100081, China;4. Key Laboratory of Ministry of Education for Nonferrous Metal Materials Science and Engineering, Central South University, Changsha 410083, China;5. Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada |
| |
Abstract: | To develop a composite material with good mechanical and radiation shielding properties, the Fe–Ni–B (Fe67.5Ni23.5B9, wt. %) coatings onto 1Cr18Ni9Ti stainless steel substrate (SS, same as below) were prepared using air-plasma spraying (APS) technique in this work. A remelting process (1050 °C/2 h) was performed on the Fe–Ni–B coatings laminated composite under vacuum condition. The microstructure, phase composing, adhesion strength, Vickers hardness distribution and residual stress of Fe–Ni–B coatings before and after the remelting process were contrastively characterized. The results show that the remelting process decrease the coating defects and make the coating more cohesive and stable. The element diffusion and new compounds formation within the coating and interface area improves the adhesion and thermal fatigue of Fe–Ni–B coatings. In addition, the drop of variability of Vickers hardness data and residual stress level qualitatively identify that the Fe–Ni–B coatings possess more consistent microstructure and mechanical integrity after the remelting process. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|