首页 | 本学科首页   官方微博 | 高级检索  
     

针束型回热器的优化及其与电声制冷机的匹配
引用本文:涂虬,陈正军,张晓青,刘钧霞,郭方中.针束型回热器的优化及其与电声制冷机的匹配[J].低温工程,2004(5):35-40.
作者姓名:涂虬  陈正军  张晓青  刘钧霞  郭方中
作者单位:华中科技大学能源与动力工程学院低温实验室,武汉,430074;华中科技大学能源与动力工程学院低温实验室,武汉,430074;华中科技大学能源与动力工程学院低温实验室,武汉,430074;华中科技大学能源与动力工程学院低温实验室,武汉,430074;华中科技大学能源与动力工程学院低温实验室,武汉,430074
基金项目:高等学校博士学科点专项科研项目
摘    要:采用网络模型优化设计出针束型回热器及其与电声制冷机的匹配关系.回热器采用针束型填料,钢针针径、针间距分别按最大冷量因子、最大冷量因子和最小损耗因子确定;以制冷系数为优化指标,按分布参数网络模型优化出回热器、两端换热器的长度及其与制冷机系统的匹配关系.

关 键 词:电声制冷机  针束型回热器  网络模型  制冷系数

OPTIMIZATION DESIGN OF PIN-ARRAY STACK AND ITS MATCHING OF LOUDSPEAKER-DRIVEN THERMOACOUSTIC REFRIGERATOR
Tu Qiu,Chen Zhengjun,Zhang Xiaoqing,Liu Junxia,Guo Fangzhong.OPTIMIZATION DESIGN OF PIN-ARRAY STACK AND ITS MATCHING OF LOUDSPEAKER-DRIVEN THERMOACOUSTIC REFRIGERATOR[J].Cryogenics,2004(5):35-40.
Authors:Tu Qiu  Chen Zhengjun  Zhang Xiaoqing  Liu Junxia  Guo Fangzhong
Abstract:The network model is adopted to optimally design loudspeaker-driven thermoacous tic refrigerator with pin-array stack.The steel pin radius and the pin spacing of pin-array stack are respectively optimized in terms of maximum cool power fa ctor and the maximum cool power factor as well as minimal dissipation power fact or. The length and the position are optimized in terms of coefficient of perform ance( COP ) by network model. Then the heat exchangers on the two ends of the stack can be optimized by the same method.
Keywords:loudspeaker-driven thermoacoustic refrigerator  pin -array stack  network model  coefficient of performance(  COP  )
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号