| 径向流吸附器制氧流程的参数实验研究 |
| |
| 引用本文： | 施绍松,刘应书,李永玲,孟宇,杨雄. 径向流吸附器制氧流程的参数实验研究[J]. 低温与特气, 2011, 29(6): 20-25. DOI: 10.3969/j.issn.1007-7804.2011.06.005 |
| |
| 作者姓名： | 施绍松 刘应书 李永玲 孟宇 杨雄 |
| |
| 作者单位： | 北京科技大学气体分离工程研究所,北京,100083 |
| |
| 基金项目： | 国家高技术发展计划(863)项目 |
| |
| 摘 要： | 建立一套径向流变压吸附制氧实验装置,对径向流制氧流程的吸附时间、均压时间、节流孔径等参数进行研究.结果表明,均压时间对产品气浓度影响最大,最佳均压时间为2到3s;其次是吸附时间,最佳吸附时间7s;节流孔径对产品气浓度也有很大影响,最佳节流子孔径为1.2 mm.装置能从空气中获取氧气浓度为93.5％的产品气,产气量0.1...
|
| 关 键 词： | 径向流吸附器 制氧 变压吸附 流程参数 |
Experimental Study on The Process Parameters of Radial Flow Absorber PSA System For Oxygen Concentration |
| |
| SHI Shaosong,LIU Yingshu,LI Yongling,MENG Yu,YANG Xiong. Experimental Study on The Process Parameters of Radial Flow Absorber PSA System For Oxygen Concentration[J]. Low Temperature and Specialty Gases, 2011, 29(6): 20-25. DOI: 10.3969/j.issn.1007-7804.2011.06.005 |
| |
| Authors: | SHI Shaosong LIU Yingshu LI Yongling MENG Yu YANG Xiong |
| |
| Affiliation: | (School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China) |
| |
| Abstract: | We established a set of radial flow PSA oxygen experimental systems,in which the radial flow of oxygen flow adsorption method and parameters of the radial flow of oxygen flow,like,adsorption time,pressure equalization time and nozzle diameter,were studied.It shows that with the most suitable time of 2~3s,the time of pressure equalization most to oxygen concentration in gas production,followed by adsorption time,the most suitable time of which is 7s.However,nozzle diameter does have effect on oxygen concentration in gas production,and 1.2 mm is the result of the most suitable size of saving sub-aperture from our research.Oxygen purity of 93.5% can be obtained from the air with the help of this device and the gas production rate is 0.16 m3/h. |
| |
| Keywords: | radial flow absorber oxygen production PAS process parameters |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
