首页 | 本学科首页   官方微博 | 高级检索  
     

污水处理厂自养菌生长动力学参数的测定研究
引用本文:吴志超,唐书娟,周振,王荣生,赵一德,麦穗海. 污水处理厂自养菌生长动力学参数的测定研究[J]. 中国给水排水, 2009, 25(9)
作者姓名:吴志超  唐书娟  周振  王荣生  赵一德  麦穗海
作者单位:1. 同济大学,环境科学与工程学院,上海,200092
2. 上海市城市排水市南运营有限公司,上海,201203
摘    要:自养菌生长动力学参数(μA)是污水处理系统模拟和设计的关键参数,该值对污水特性非常敏感,需要准确测定.通过连续监测恒温间歇反应器中硝态氮浓度的变化,并结合非线性最小二乘法进行拟合,给出了μA的测定方法.在不同污泥浓度下多次试验的测定结果表明,该方法具有较好的重现性,试验测定μA的最佳VSS为100~200 mg/L.对上海市曲阳水质净化厂的测定结果表明,20℃时好氧池中自养菌的μA为(0.79±0.06)d-1;温度对μA的影响显著,其Arrhe-nius温度系数约为1.11.

关 键 词:活性污泥模型  最大比增长速率  自养菌  硝化

Determination of Kinetic Parameters of Autotrophic Bacteria from Wastewater Treatment Plant
WU Zhi-chao,TANG Shu-juan,ZHOU Zhen,WANG Rong-sheng,ZHAO Yi-de,MAI Sui-hai. Determination of Kinetic Parameters of Autotrophic Bacteria from Wastewater Treatment Plant[J]. China Water & Wastewater, 2009, 25(9)
Authors:WU Zhi-chao  TANG Shu-juan  ZHOU Zhen  WANG Rong-sheng  ZHAO Yi-de  MAI Sui-hai
Affiliation:1.College of Environmental Science and Engineering;Tongji University;Shanghai 200092;China;2.South Shanghai Municipal Drainage Operation Co.Ltd.;Shanghai 201203;China
Abstract:The maximum specific growth rate of autotrophic bacteria is crucial for modeling and designing the nitrification process in wastewater treatment systems.Because the nitrification process is so sensitive to this value,its measurements should be precise and accurate.Through continuously monitoring nitrate nitrogen concentration in the batch reactors,the growth rate of autotrophic bacteria was calculated by the non-linear least squares method.The test results demonstrate that this method,used for different slu...
Keywords:activated sludge model  maximum specific growth rate  autotrophic bacteria  nitrification  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号