| 窄间隙埋弧焊温度场数值分析 |
| |
| 引用本文： | 张磊,柳长青,于静伟,胡希海,金光日,龚凤.窄间隙埋弧焊温度场数值分析[J].焊接学报,2016,37(3):83-87. |
| |
| 作者姓名： | 张磊 柳长青 于静伟 胡希海 金光日 龚凤 |
| |
| 作者单位： | 1.机械科学研究院哈尔滨焊接研究所, 哈尔滨 150028 |
| |
| 基金项目： | 机械科学研究总院技术发展基金资助项目(201310213) |
| |
| 摘 要： | 建立考虑电弧倾斜及坡口侧壁对电弧能量分配影响的热源模型,模拟两种焊丝姿态下的窄间隙埋弧焊温度场,通过试验验证模拟结果的正确性.结果表明,焊丝姿态的差异形成不同的温度分布特点.双丝焊时温度场呈沿焊接方向非对称分布,热量集中在远离侧壁侧,熔宽较大,侧壁熔深较小;单丝焊时温度场呈沿焊接方向对称分布,熔宽较小,侧壁熔深较大.双丝焊时侧壁熔合区受电流波动的影响较小.在前丝、后丝选用与单丝焊相同的电流及电压时双丝焊熔敷效率高,且具有产生更小过热区的倾向.
|
| 关 键 词： | 窄间隙埋弧焊 坡口侧壁 温度场 |
| 收稿时间： | 2015/10/29 0:00:00 |
Numerical analysis of temperature field of narrow gap submerged arc welding |
| |
| ZHANG Lei,LIU Changqing,YU Jingwei,HU Xihai,JIN Guangri and GONG Feng.Numerical analysis of temperature field of narrow gap submerged arc welding[J].Transactions of The China Welding Institution,2016,37(3):83-87. |
| |
| Authors: | ZHANG Lei LIU Changqing YU Jingwei HU Xihai JIN Guangri and GONG Feng |
| |
| Affiliation: | 1.Harbin Welding Institute, China Academy of Machinery Science and Technology, Harbin 150080, China2.Fushun Mechanical Equipment Manufacturing Co., Ltd, Fushun 113006, China |
| |
| Abstract: | The temperature field of single wire and tandem wires narrow gap submerged arc welding were calculated by using the special heat source model. The effectiveness of the simulation results was verified by the experiments. The simulation results show that the temperature field aredifferent between the single wire and tandem wires welding. The temperature field of the tandem welding is dissymmetric with largerweld width and smaller weld penetration on the sidewall. The influence of current fluctuation in the penetration of the sidewall is smaller in the tandem welding. With the same current and voltage,the tandem welding has higher deposition efficiency and a smaller tendency to produce overheated zone. |
| |
| Keywords: | narrow gap submerged arc welding sidewall temperature field |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
