首页 | 本学科首页   官方微博 | 高级检索  
     

用V-EPC法制备表面耐磨铸铁的组织与性能研究
引用本文:高红霞,商全义,刘建秀,杨改云. 用V-EPC法制备表面耐磨铸铁的组织与性能研究[J]. 铸造, 2006, 55(10): 1040-1042
作者姓名:高红霞  商全义  刘建秀  杨改云
作者单位:1. 郑州轻工业学院机电工程学院,河南,郑州,450002
2. 中原工学院材料与化工系,河南,郑州,450007
基金项目:河南省高校杰出科研人才创新工程项目;河南省教育厅自然科学基金
摘    要:采用真空实型铸造(V-EPC)法,在聚苯乙烯(EPS)泡沫模表面涂刷料浆,浇注后铁液渗入料浆涂层,得到表面耐磨铸铁。料浆主要组成为SiC粉、EPS颗粒、Cr-Fe粉、助渗剂、粘结剂等。研究发现,耐磨铸铁表层组织中石墨尺寸小于基体中石墨,表层中硬质颗粒SiC与基体冶金结合且分布均匀。磨粒磨损试验结果表明,耐磨铸铁表层的磨损量是基体铸铁的37%。通过对表面层的组织结构分析探讨了表面渗层耐磨性较高的原因。

关 键 词:铸铁  铸渗  耐磨性  组织
文章编号:1001-4977(2006)10-1040-03
收稿时间:2006-04-05
修稿时间:2006-06-07

Study on the Microstructures and Resistance of Wear Resistant Surface Cast Iron by V-EPC
GAO Hong-xia,SHANG Quan-yi,LIU Jian-xiu,YANG Gai-yun. Study on the Microstructures and Resistance of Wear Resistant Surface Cast Iron by V-EPC[J]. Foundry, 2006, 55(10): 1040-1042
Authors:GAO Hong-xia  SHANG Quan-yi  LIU Jian-xiu  YANG Gai-yun
Affiliation:1. Mechanical Engineering Institute, Zhengzhou University of Light Industry, Zhengzhou 450002 Henan, China; 2. Department of Materials and Chemical Engineering, Zongyuan University of technology, Zhengzhou 450007, Henan, China
Abstract:Using vacuum-evaporative pattern casting(V-EPC) technology,the wear resistant surface cast iron can be gained by dipping the EPS model with the slime,casting and infiltrating the liquid iron to the slime layer.The main ingredients of the slime were SiC powder,EPS powder,Cr-Fe powder,auxiliary infiltration agent and binder,etc.The research shows that the graphite figure of surface layer was smaller than it of matrix and the SiC granule of surface layer was metallurgy coalescent with the matrix and the SiC granule was well-proportioned spread around.The test result of grit wearing machine shows that the wear amount of the surface layer was 37% that of the matrix iron.The causes that the wear resistance of surface infiltration layer was better were searched by microstructures analysis.
Keywords:V-EPC
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号