首页 | 本学科首页   官方微博 | 高级检索  
     

离子色谱-电化学检测器测定电镀废水中的氰化物
引用本文:鲁蕴甜.离子色谱-电化学检测器测定电镀废水中的氰化物[J].广州化工,2014(12):156-158.
作者姓名:鲁蕴甜
作者单位:重庆市九龙坡区环境监测站,重庆400018
摘    要:建立了电镀废水中氰化物的离子色谱-电化学检测器检测方法。调节样品pH值至12~13之间,经前处理后进样,保留时间定性,峰面积定量,结果表明该方法对CN-的检出限为1μg/L,在1~40 mg/L浓度范围内具有良好的线性关系,相关系数为0.999 958,CN-的加标回收率在95%~110%之间,相对标准偏差RSD(n=6)为5.71%,该方法可用于测定废水中氰化物的含量。

关 键 词:离子色谱  电化学检测器  电镀废水  氰化物

Determination of Cyanide in Plating Waste Water by Ion Chromatography with Electrochemical Detector
LU Yun-tian.Determination of Cyanide in Plating Waste Water by Ion Chromatography with Electrochemical Detector[J].GuangZhou Chemical Industry and Technology,2014(12):156-158.
Authors:LU Yun-tian
Affiliation:LU Yun-tian ( Chongqing Jiulongpo District Environmental Monitoring Station, Chongqing 400018, China)
Abstract:A method was presented to determine cyanide in plating waste water based on ion chromatography with electrochemical detector.By adjusting the pH of the sample 12 ~13, the retention time qualitative , quantitative peak area, the results showed that the detection limit was 1 μg/L, its had a good linear relationship in the 1 ~40 mg/L concentration range , the correlation coefficient was 0.999 958 , and the recovery rate of CN -was 95%~110%.This method good stability , 6 experimental results of the relative standard deviation RSD was 5.71%, and the method can be used for the content determination of cyanide in plating waste water.
Keywords:ion chromatography  electrochemical detector  plating waste water  cyanide
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号