首页 | 本学科首页   官方微博 | 高级检索  
     

石油沥青软化点测定因素的探讨
引用本文:文萍,孙卓辉,李庶峰,李传,邓文安.石油沥青软化点测定因素的探讨[J].当代化工,2014(7):1175-1177.
作者姓名:文萍  孙卓辉  李庶峰  李传  邓文安
作者单位:中国石油大学(华东)化学工程学院,山东青岛266555
摘    要:对影响石油沥青软化点测定的因素进行了分析,如升温速率对软化点测定的影响、底板隔离剂厚度对软化点测定的影响及加热介质是否降温至5℃对软化点测定的影响,结果表明:若升温速率大于国家标准(5℃/min),测定的软化点偏高;若升温速率小于国家标准(5℃/min),测定的软化点偏低。底板隔离剂涂抹过厚,会使软化点测定结果偏小。不降温至5℃开始实验,测定的软化点偏高。。

关 键 词:沥青  软化点  影响因素

Research on Test Methods of Softening Point of Asphalt
WEN Ping,Sun Zhuo-hui,LI Shu-feng,LI Chuan,DENG Wen-an.Research on Test Methods of Softening Point of Asphalt[J].Contemporary Chemical Industry,2014(7):1175-1177.
Authors:WEN Ping  Sun Zhuo-hui  LI Shu-feng  LI Chuan  DENG Wen-an
Affiliation:(College of Chemical Engineering, China University of Petroleum (Huadong), Shandong Qingdao 266555, China)
Abstract:Factors affecting asphalt softening point test results were analyzed, such as heating rate, thickness of base isolation agent and so on. The results show that: if the heating rate is higher than the national standard (5 ℃/min), the determined value of softening point is on the high side; If the heating rate is less than the national standard (5 ℃/min), the determined value of softening point is on the low side; If plate isolation agent thickness is too thick, the determined value of softening point is on the low side; If heating medium temperature is cooled to 5 ℃ during testing, the determined value of softening point is on the high side .
Keywords:Asphalt  Softening point  Influence factors
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号