Algebraic integer architecture with minimum adder count for the 2-D Daubechies 4-tap filters banks

A multiplierless architecture based on algebraic integer representation for computing the Daubechies 4-tap wavelet transform for 1-D/2-D signal processing is proposed. This architecture improves on previous designs in a sense that it minimizes the number of parallel 2-input adder circuits. The algorithm was achieved using numerical optimization based o exhaustive search over the algebraic integer representation. The proposed architecture furnishes exact computation up to the final reconstruction step, which is the operation that maps the exactly computed filtered results from algebraic integer representation to fixed-point. Compared to Madishetty et al. (IEEE Trans Circuits Syst I (Accepted, In Press), 2012a), this architecture shows a reduction of (10cdot n-3) adder circuits, where (n) is the number of wavelet decomposition levels. Standard (512times 512) images Mandrill, Lena, and Cameraman were submitted to digital realizations of both proposed algebraic integer based as well as fixed-point schemes, leading to quantifiable comparisons. The design is physically implemented for a 4-level 2-D decomposition using a Xilinx Virtex-6 vcx240t-1ff1156 FPGA device operating at up to a maximum clock frequency of 263.15 MHz. The FPGA implementation is tested using hardware co-simulation using an ML605 board with clock of 100 MHz. A 45 nm CMOS synthesis shows improved clock frequency of better than 500 MHz for a supply voltage of 1.1 V.