| 汽车覆盖件冲裁修边模废料处理方案 |
| |
| 引用本文： | 沈左军.汽车覆盖件冲裁修边模废料处理方案[J].模具制造,2008,8(11):33-35. |
| |
| 作者姓名： | 沈左军 |
| |
| 作者单位： | 奇瑞汽车股份有限公司,安徽芜湖,241000 |
| |
| 摘 要： | 介绍汽车覆盖件修边模废料排除的相关设计要点和主要的调试经验，同时对此类型废料如何下滑进行分析。重点在工艺分析、模具结构设计和现场调试等几个方面论述废料下滑设计的要点。
|
| 关 键 词： | 冷冲压 自动化 废料下滑 工序排布 |
Plan of Waste Treatment of Cold Stamping and Trimming Die for the Auto-Cover |
| |
| Shen Zuojun.Plan of Waste Treatment of Cold Stamping and Trimming Die for the Auto-Cover[J].Die & Mould Manufacture,2008,8(11):33-35. |
| |
| Authors: | Shen Zuojun |
| |
| Abstract: | Introduced the related design points and material remove of auto-cover cold-trimming die, and debugging experience of the waste analyzed waste material sliding. The main points of waste material slide design were mainly discussed from technics analysis, die structure design, local debugging,and so on. |
| |
| Keywords: | cold stamping automation waste sliding down working procedure layout |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
