| 弹性点接触失配啮合性能和齿面接触迹预控 |
| |
| 引用本文： | 胡来容 刘鹄然. 弹性点接触失配啮合性能和齿面接触迹预控[J]. 湖北工业大学学报, 1994, 9(3): 139-144 |
| |
| 作者姓名： | 胡来容 刘鹄然 |
| |
| 作者单位： | 西安交通大学，湖北工学院机械工程系 |
| |
| 摘 要： | 本文根据空间啮合原理、利用弹性力学理论、计及齿面接触变形，首次把Ｂａｘｔｅｒ方法推广应用到点啮合的领域，并着重论述了弹性点接触的失配啮合性能和齿面接触迹预控，为收缩齿制曲线齿锥齿轮副预控齿面啮合质量提供了新的途径和方法．
|
| 关 键 词： | 失配点啮合 齿面接触迹 齿轮 弹性点接触 |
The Pre-control of Mesh Performance on Elastic Mismatched Point Meshing and for Contact Area of Tooth Surface |
| |
| Hu Lirong,Liu Huran. The Pre-control of Mesh Performance on Elastic Mismatched Point Meshing and for Contact Area of Tooth Surface[J]. Journal of Hubei University of Technology, 1994, 9(3): 139-144 |
| |
| Authors: | Hu Lirong Liu Huran |
| |
| Affiliation: | Hu Lirong;Liu Huran |
| |
| Abstract: | According to spotials meshing principle and elasticity theory,this paper the Baxtermethod is first spread and applied to the field of Point meshing,taking into account deformationof tooth surface contact.The elastic mismatched point meshing performance aam pre-controlof eontact mark of tooth surface are emphatically discussed,and a new method is provided forthe helical bevel gears and hypoid geals. |
| |
| Keywords: | Elasticity Mismatched point meshing Contact mark of tooth surface |
| 本文献已被 CNKI 维普 等数据库收录！ |
