Preparation of porous sheet composite impregnated with TiO2 photocatalyst by a papermaking technique

Titanium dioxide (TiO₂) powder-containing sheet composites, called TiO₂ sheet, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ powders were homogeneously scattered over the fiber-mix networks tailored within the catalyst sheet. Under UV irradiation, the TiO₂ paper could decompose p-hydroxyacetophenone (p-HAP), although the degradation efficiency by the TiO₂ sheet was lower than that by the TiO₂ powder. Scanning electron microscopy revealed that coverage of the TiO₂ particles inside the sheet by alumina binder which was used to improve the sheet strength caused the deterioration of the photocatalytic performance. Internal addition of alumina binder made the TiO₂ sheet porous and such a TiO₂ sheet exhibited high photocatalytic performance equivalent to that of TiO₂ powder. The porous structure of TiO₂ sheet might contribute to effective transport of p-HAP to the surface of TiO₂ particles inside the sheet, resulting in high degradation performance. In addition, TiO₂ sheet prepared using TiO₂ sol showed higher photocatalytic efficiency than TiO₂ powder and it was indicated that the porous sheet structure might provide suitable conditions for TiO₂ catalysis for photodecomposition.