| 在曲柄压机上变薄拉深有限元模拟与试验研究 |
| |
| 引用本文： | 胡建军,周杰,金艳. 在曲柄压机上变薄拉深有限元模拟与试验研究[J]. 锻压装备与制造技术, 2004, 39(3): 88-90 |
| |
| 作者姓名： | 胡建军 周杰 金艳 |
| |
| 作者单位： | 1. 重庆工学院,材料科学与工程学院,重庆,400050
2. 重庆大学,重庆,400044 |
| |
| 摘 要： | 通过对轴承环进行拉深工艺分析，找到了影响变薄拉深工艺的各种因素，论证了轴承环进行变薄拉深的可行性与优越性。采用有限元软件Dynaforrn及Deforrn对其进行数值模拟，获得了优化的工艺参数并得到生产实际检验。
|
| 关 键 词： | 变薄拉深 曲柄压机 有限元 轴承环 试验研究 数值模拟 |
| 文章编号： | 1672-0121(2004)03-0088-02 |
| 修稿时间： | 2004-03-03 |
Simulation & Studyin lroning with Crank Press |
| |
| HU Jianjun,ZHOU Jie,JIN Yan. Simulation & Studyin lroning with Crank Press[J]. China Metalforming Equipment & Manufacturing Technology, 2004, 39(3): 88-90 |
| |
| Authors: | HU Jianjun ZHOU Jie JIN Yan |
| |
| Affiliation: | HU Jianjun1,ZHOU Jie2,JIN Yan2 |
| |
| Abstract: | By analyzing the process of bearing cages,the feasibility and advantage of ironing with crank press have been demonstrated. The diversified factorS that influence ironing process have been analysed adequately. The process has been simulated by Dynaform and Deform software to optimize process parameters and prove it in the practice.It is safe to say perfect bearing cages can be obtained under the other reasonable assistant working procedures when part was produced on crank press by ironing. |
| |
| Keywords: | Bearing Cages Ironing FEM Crank Press |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
