| 燃料电池发动机与上位机的通信设计与实现 |
| |
| 引用本文： | 徐稀,全睿. 燃料电池发动机与上位机的通信设计与实现[J]. 机械工程与自动化, 2011, 0(6) |
| |
| 作者姓名： | 徐稀 全睿 |
| |
| 作者单位： | 1. 南车长江车辆有限公司武汉分部装备管理处,湖北 武汉,430000
2. 武汉理工大学汽车工程学院,湖北武汉,430070 |
| |
| 摘 要： | 燃料电池发动机是一个多输入多输出的非线性强耦合系统,对其进行可靠性设计与实时监控显得尤为重要.针对燃料电池发动机的监控要求,设计了基于双CPU的主控制器软、硬件,利用VC++开发了上位机监控界面,通过串口实现两者的实时通信；给出了相关软、硬件设计方法,并建立了实用可靠的通信协议.
|
| 关 键 词： | 燃料电池发动机 控制器 上位机 串口 通信协议 |
Design and Realization of Communication between Fuel Cell Engine and PC |
| |
| XU Xi,QUAN Rui. Design and Realization of Communication between Fuel Cell Engine and PC[J]. Mechanical Engineering & Automation, 2011, 0(6) |
| |
| Authors: | XU Xi QUAN Rui |
| |
| Affiliation: | XU Xi1,QUAN Rui2 (1.Equipment Management Department of CSR Co.Ltd.Wuhan Branch,Wuhan 430000,China,2.School of Automobile Engineering,Wuhan University of Technology,Wuhan 430070,China) |
| |
| Abstract: | Fuel cell engine(FCE) is a nonline strong coupled system with multi-input and multi-output,reliable design and real time monitoring of which are very important.According to the requirement of FCE's monitoring,the hardware and software of FCE controller based on double CPU is designed in this paper,and the PC monitoring interface is developed with Visual C++,the communication between them is realized with UART.Besides,the practical and reliable communication protocol is also set. |
| |
| Keywords: | fuel cell engine controller PC UART communication protocol |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
