| 不同槽数槽轮机构运动分析的MATLAB实现 |
| |
| 引用本文： | 熊文伟,张国平. 不同槽数槽轮机构运动分析的MATLAB实现[J]. 机械工程与自动化, 2011, 0(4) |
| |
| 作者姓名： | 熊文伟 张国平 |
| |
| 作者单位： | 湖南机电职业技术学院,湖南长沙,410151 |
| |
| 基金项目： | 湖南省科学技术厅项目(2009FJ3035) |
| |
| 摘 要： | 对内槽轮机构的运动系数、运动方程及运动参数进行探讨,编写了基于MATLAB的内槽轮机构运动分析程序.通过比对不同槽数内槽轮机构的动力特性曲线和运动特性曲线,得出了随着槽轮槽数的减少内槽轮机构柔性冲击增大的结论,为自动生产线中工件传送或转位机构的运动分析提供了一定的理论依据.
|
| 关 键 词： | 内槽轮机构 运动特性 柔性冲击 MATLAB |
Motion Analysis of Geneva Mechanism with Different Slot Number by MATLAB |
| |
| XIONG Wen-wei,ZHANG Guo-ping. Motion Analysis of Geneva Mechanism with Different Slot Number by MATLAB[J]. Mechanical Engineering & Automation, 2011, 0(4) |
| |
| Authors: | XIONG Wen-wei ZHANG Guo-ping |
| |
| Affiliation: | XIONG Wen-wei,ZHANG Guo-ping(Hunan Mechanical & Electrical Polytechnic,Changsha 410151,China) |
| |
| Abstract: | The motion coefficient,motion equation and motion parameters of an internal geneva mechanism were discussed in this paper.The motion analysis program of internal geneva mechanism were compiled by MATLAB.The dynamic curves and kinetic curves of internal geneva mechanisms with different slot number were compared.The inertial impact of geneva mechanism will be enlarged with the decrease of the slot number,this conclusion provides certain theoretical basis for the workpiece delivery and the kinetic analysis of ... |
| |
| Keywords: | internal geneva mechanism kinetic characteristic inertial impact MATLAB |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
