首页 | 本学科首页   官方微博 | 高级检索  
     

微波辐射条件下SAPO-5分子筛的合成与表征
引用本文:杨 威,宋 宇,董 卉,徐同舟,黄城涛. 微波辐射条件下SAPO-5分子筛的合成与表征[J]. 大连工业大学学报, 2014, 0(2): 143-145
作者姓名:杨 威  宋 宇  董 卉  徐同舟  黄城涛
作者单位:大连工业大学纺织与材料工程学院;
基金项目:无机合成与制备化学国家重点实验室开放课题(2012-31);辽宁省教育厅A类项目(L201292)
摘    要:以异丙醇铝、磷酸、正硅酸乙酯为反应原料,三乙胺作为模版剂,功率800 W、180℃微波辐射30min合成了粒径均一、具有AFI拓扑结构的SAPO-5分子筛,系统研究了Al2O3与SiO2摩尔比和HF添加量等因素对产物长径比和晶体形貌的影响。采用XRD、SEM等分析手段对产物进行表征。结果表明,n(Al2O3)/n(SiO2)可以控制晶体尺寸的大小以及长径比,HF的存在影响晶体的成核及分散性。

关 键 词:SAPO-5分子筛  微波合成  表征

Synthesis and characterization of SAPO-5 molecular sieve by microwave irradiation
Abstract:SAPO-5 molecular sieve was compounded by microwave irradiation using Al(OPri)3, H3PO4,C8H20O4Si as the reaction material and triethylamine as a temple at 180℃for 30min.Some factors influencing on products such as n(Al2O3)/n(SiO2),HF dosage were systematically studied. The products were characterized by XRD,SEM and results showed that n(Al2O3)/n(SiO2)could control the crystal size and HF dosage could influence the nucleation and dispersion.
Keywords:SAPO-5 molecular sieve  microwave synthesis  characterization
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号