Torsional Wear Behavior of MC Nylon Composites Reinforced with GF: Effect of Angular Displacement

The torsional wear behavior of monomer cast nylon (MC nylon) composites reinforced with glass fiber was studied with a self-made torsional friction tester. The worn surface of MC nylon composites was investigated with a scanning electron microscope. The worn surface of the steel disk was observed with a 3-D profiler. The experimental results indicated that the shape of torque–angular displacement (T–θ) curves changed from elliptic shape to quasi-parallelogram with the angular displacement increased from 5° to 30°. The serious wear characterized with a deep groove occurred at the position of about 1.5–4 mm radius of contact zone on the steel surface. The mass of MC nylon samples increased after torsional wear test. The torsional contact area can be divided into three zones: (a) a central stick zone, (b) an intermediate mixed-slipping annulus, and (c) a peripheral sliding annulus. The most serious wear occurred in the intermediate annulus because of the higher contact stress and mixed slip regime. The main wear mechanism of MC nylon samples was adhesive wear and abrasive wear. Plastic deformation of asperities was the character in the central zone. Slight adhesive wear was the main wear mechanism in the peripheral annulus.