首页 | 本学科首页   官方微博 | 高级检索  
     

螺栓法兰连接结构的振动仿真分析
引用本文:高旭,曾国英. 螺栓法兰连接结构的振动仿真分析[J]. 噪声与振动控制, 2010, 30(3): 38-40. DOI:  10.3969/j.issn.1006-1355.2010.03.011
作者姓名:高旭  曾国英
作者单位:(西南科技大学制造科学与工程学院,四川绵阳 621010)
基金项目:国家自然科学基金,中国工程物理研究院联合资助基金 
摘    要:利用ANSYS动力学分析软件建立了螺栓法兰连接结构的1/8循环对称三维非线性有限元模型,在正弦激励下对三种不同预紧力矩情况下的模型进行了瞬态动力学分析。通过ANSYS后处理对稳态响应位移信号进行微分处理得出了螺栓附近法兰上下对应节点加速度信号以及差值信号,与实验数据进行对比验证,得出预紧程度与信号的相互关系,确定所建有限元模型是可靠的。

关 键 词:振动与波  有限元  螺栓连接  瞬态分析  差值分析  
收稿时间:2009-07-30

Analysis of Vibration Simulation of Bolts-Flange Connection Structure
GAO Xu,ZENG Guo-ying. Analysis of Vibration Simulation of Bolts-Flange Connection Structure[J]. Noise and Vibration Control, 2010, 30(3): 38-40. DOI:  10.3969/j.issn.1006-1355.2010.03.011
Authors:GAO Xu  ZENG Guo-ying
Affiliation:(College of Mechanical Engineering, Southwest Science and Technology University, Mianyang Sichuan 621010, China)
Abstract:Using ANSYS code,a 1/8-cycle symmetric 3-D nonlinear finite element model of bolts-flange connection structure is established.Nonlinear transient dynamic analysis is done for the model with three different tightening torques under sinusoidal excitation.Using ANSYS post-processing,the acceleration signals and signal differences of the pairs of nodes on the top and at the bottom of the flange near the bolt are obtained.The simulation data is compared with experimental data and the relationship between the tightening torques and the signals is acquired.The comparison result ensures the reliability of the finite element model.
Keywords:vibration and wave  finite element  bolt-flange connection  transient analysis  difference analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《噪声与振动控制》浏览原始摘要信息
点击此处可从《噪声与振动控制》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号