| 高强钢板冲压回弹影响因素研究 |
| |
| 引用本文： | 罗云华,王磊.高强钢板冲压回弹影响因素研究[J].锻压技术,2009,34(1). |
| |
| 作者姓名： | 罗云华 王磊 |
| |
| 作者单位： | 华中科技大学,材料成形与模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 摘 要： | 基于ISO-CD24213/2006方法,以回弹角作为回弹值,运用Dynaform对高强钢板的冲压成形及回弹进行数值模拟,分析了板料厚度、板料宽度、压边力、拉延筋及材料性能等因素对回弹值的影响.研究发现:较小压边力下回弹值随板料厚度的增加而减小,较大压边力下则先增大、后减小,且随着压边力的增大回弹值显著减小;此外,减小板料宽度、合理布置拉延筋、选择屈服强度较小的材料均可减小回弹值.
|
| 关 键 词： | 高强钢板 回弹 数值模拟 |
Research on influencing factors of springback during sheet metal stamping of high strength steel |
| |
| LUO Yun-hua,WANG Lei.Research on influencing factors of springback during sheet metal stamping of high strength steel[J].Forging & Stamping Technology,2009,34(1). |
| |
| Authors: | LUO Yun-hua WANG Lei |
| |
| Affiliation: | State Key Laboratory of Material Processing and Die and Mould Technology;Huazhong University of Science and Technology;Wuhan 430074;China |
| |
| Abstract: | Based on ISO-CD24213/2006 method,taking the angle as springback value,the forming and springback processes during stamping of high stress steel were simulated respectively using the commercial FE software Dynaform.The influencing factors,such as sheet thickness,sheet width,blank holder force,draw bead and material properties were investigated,and the influence laws were obtained.The conclusions show that the springback angle will decrease with the increase of sheet thickness under a small blank holder force... |
| |
| Keywords: | Dynaform |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
