| 连铸结晶器内凝固过程的热-流-力数值模拟 |
| |
| 引用本文： | 薛建国,王长松,张玉宝,金学伟.连铸结晶器内凝固过程的热-流-力数值模拟[J].武汉理工大学学报,2010(1). |
| |
| 作者姓名： | 薛建国 王长松 张玉宝 金学伟 |
| |
| 作者单位： | 北京科技大学机械工程学院; |
| |
| 基金项目： | 内蒙古自然科学基金(200607010705) |
| |
| 摘 要： | 针对板坯连铸生产中的问题,建立了热流力耦合的三维非稳态有限元模型。以尺寸为1.2 m×0.2 m的Q235B板坯为研究对象,利用Procast软件的二次开发,求解出了结晶器区域内的温度场、流场和应变分布。计算结果表明,铸坯收缩量在不同方向上存在不同的分布状态。考虑气隙产生对传热的影响时,结晶器出口铸坯表面平均温度由1 148.3℃增加到1 275.7℃,坯壳厚度由18.7 mm减少到15.4 mm。
|
| 关 键 词： | 板坯连铸 结晶器 数值模拟 非稳态模型 |
Numerical Simulation of Solidification Process in Slab Casting Mould Based on the 3D Non-steady Model |
| |
| XUE Jian-guo,WANG Chang-song,ZHANG Yu-bao,JIN Xue-wei.Numerical Simulation of Solidification Process in Slab Casting Mould Based on the 3D Non-steady Model[J].Journal of Wuhan University of Technology,2010(1). |
| |
| Authors: | XUE Jian-guo WANG Chang-song ZHANG Yu-bao JIN Xue-wei |
| |
| Affiliation: | XUE Jian-guo,WANG Chang-song,ZHANG Yu-bao,JIN Xue-wei (School of Mechanical Engineering,University of Science , Technology Beijing,Beijing 100083,China) |
| |
| Abstract: | A numerical investigation is conducted for exploring the non-steady transport phenomena relative to cast speed in a continuous steel slab caster.The width and thickness of slab are 1.2 m and 0.2 m,and respectively the steel grade is Q235B.The distributions of temperature,flow,stress and strain in caster are obtained by using the commercial software,ProCAST.The results show that,the shrinkage of slab has different shape curve on different direction.Consider of the effect of gap width,the average temperature ... |
| |
| Keywords: | slab continuous casting mould numerical simulation non-steady model |
| 本文献已被 CNKI 等数据库收录！ |
|
