数控机床回参考点故障分析与排除 |
| |
引用本文: | 秦启书,刘家平.数控机床回参考点故障分析与排除[J].装备制造技术,2007(5):100-100. |
| |
作者姓名: | 秦启书 刘家平 |
| |
作者单位: | 河南工业职业技术学院,河南,南阳,473009 |
| |
摘 要: | 针对数控机床回参考点过程中各种形式的故障进行分析、诊断及总结,给数控机床回参考点过程中的故障排除提供参考。
|
关 键 词: | 数控机床 参考点 故障排除 |
文章编号: | 1672-545X(2007)05-0100-01 |
修稿时间: | 2007-03-19 |
Fault Diagnosis and Exclusion of NC Machine Tool Return Reference Point |
| |
Authors: | QIN Qi-shu LIU Jia-ping |
| |
Affiliation: | Henan Polytechnic Institute, Nanyang Henan 473009, China |
| |
Abstract: | Multiform faults that occur in the process of returning to the reference point in NC machine tool was analyzed,diagnosed and concluded,and provide a reference for excluding the faults. |
| |
Keywords: | NC machine tool Reference point Fault exclusion |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|