首页 | 本学科首页   官方微博 | 高级检索  
     

IPv6可用带宽测量方法的设计与实现
引用本文:李智涛,徐雅静,刘利宏,徐惠民.IPv6可用带宽测量方法的设计与实现[J].电子科技大学学报(自然科学版),2008,37(6):922-925.
作者姓名:李智涛  徐雅静  刘利宏  徐惠民
作者单位:1.北京邮电大学电信工程学院 北京 海淀区 100876;
基金项目:国家高技术研究发展计划(863计划) , 国家自然科学基金  
摘    要:提出一种与现有带宽测量方法(包对法)不同的探测理论——基于链路状态的带宽测量方法。源端向目的端发送一系列小的探测报文,通过对探测报文的时延参数进行数理统计得到链路忙闲状态,进而获得链路可用带宽。采用此方法也可用于计算各种链路容量和链路空闲率。在实际测量中为解决探测报文与背景业务之间的相互影响,利用IPv6基本报头中流标签和业务类型字段设计专门的测试流和测试级。仿真证明方法正确。

关 键 词:可用带宽    扩展报文头    IPv6    链路状态    时间戳
收稿时间:2007-04-27

Design and Implementation of Available Bandwidth Measurement in IPv6 Networks
LI Zhi-tao,XU Ya-jing,LIU Li-hong,XU Hui-min.Design and Implementation of Available Bandwidth Measurement in IPv6 Networks[J].Journal of University of Electronic Science and Technology of China,2008,37(6):922-925.
Authors:LI Zhi-tao  XU Ya-jing  LIU Li-hong  XU Hui-min
Affiliation:1.School of Telecommunication Engineering,Beijing University of Posts and Telecommunication Haidian Beijing 100876;2.Beijing Special Engineering,Design Institute Chaoyang Beijing 100028
Abstract:A novel approach to available bandwidth measurement based on the link status is proposed, which is different from the packet train method. The source sends small packets as probes instead of sending packet pair/train back-to-back to achieve the link status and the available bandwidth. This method can measure the capacity and idle ratio of the targeted link. Meanwhile, in order to resolve the influence of cross traffic, the "test stream" and "test level" are designed using the corresponding fields in the IPv6 basic header. This approach is verified through simulations.
Keywords:IPv6
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《电子科技大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《电子科技大学学报(自然科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号