Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates

In this paper, a concept of delamination factor F_d (i.e. the ratio of the maximum diameter D_max in the damage zone to the hole diameter D) is proposed to analyze and compare easily the delamination degree in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Experiments were performed to investigate the variations of cutting forces with or without onset of delamination during the drilling operations. The effects of tool geometry and drilling parameters on cutting force variations in CFRP composite materials drilling were also experimentally examined. The experimental results show that the delamination-free drilling processes may be obtained by the proper selections of tool geometry and drilling parameters. The effects of drilling parameters and tool wear on delamination factor are also presented and discussed.Cutting temperature has long been recognized as an important factor influencing the tool wear rate and tool life. An experimental investigation of flank surface temperatures is also presented in this paper. Experimental results indicated that the flank surface temperatures increase with increasing cutting speed but decreasing feed rate. Optimal cutting conditions are proposed to avoid damage from burning during the drilling processes.