Measuring fatigue cracks in fillet welded joints

Accurate measurement of short (<1 mm depth) elliptical fatigue cracks that grow from the toes of fillet welds has proved to be an obstacle to the application of fracture mechanics principles to welding fatigue. This paper reports a DC potential drop technique which allows continuous measurement of the depth of such elliptical cracks. A delicate compromise between sensitivity and accuracy, combined with superior electrical stability displayed by the measurement apparatus, has allowed detection of: 1 — crack growth less than 0.01 mm and; 2 — crack growth rates less than 10^?7 mm/cycle for cracks less than 1 mm deep.Preliminary results have indicated the relative importance of stress ratio, defect size and material variation on the growth of these short elliptical cracks. When the weld toe is subject to high stress ratios the phenomenon may be considered propagation dominated whereas low stress levels increase the influence of threshold and initiation mechanisms.