|
|||||
|
|
| 烧结工艺对石英质多孔陶瓷性能的影响 | |
| 引用本文： | 朱素娟,陈永永,肖伟龙,张海涛,邓湘云,李建保,邱文达,章文.烧结工艺对石英质多孔陶瓷性能的影响[J].陶瓷学报,2011,32(1). |
| 作者姓名： | 朱素娟 陈永永 肖伟龙 张海涛 邓湘云 李建保 邱文达 章文 |
| 作者单位： | 1. 海南优势资源化工材料应用技术教育部重点实验室,硅锆钛资源综合开发与利用海南省重点实验室,海南大学材料与化工学院,海南,海口,570228 2. 海南优势资源化工材料应用技术教育部重点实验室,硅锆钛资源综合开发与利用海南省重点实验室,海南大学材料与化工学院,海南,海口,570228;天津师范大学物理与电子信息学院,天津,300387 3. 海南优势资源化工材料应用技术教育部重点实验室,硅锆钛资源综合开发与利用海南省重点实验室,海南大学材料与化工学院,海南,海口,570228;清华大学材料,科学与工程学院新型陶瓷与精细工艺国家重点实验室,北京,100084 |
| 基金项目： | 国家高技术研究发展计划(863计划)资助项目，国家自然科学基金资助项目，海南省教育厅基金资助项目，海南大学科研基金 |
| 摘 要： | 以石英砂为主要原料,采用液相烧结法,经半干压成型制备石英质多孔陶瓷.采用SEM对多孔陶瓷的显微结构进行表征.探讨了烧结温度、保温时间对多孔陶瓷孔隙率及断裂强度的影响.结果表明:随着烧结温度升高,保温时间延长,石英质多孔陶瓷的孔隙率下降、断裂强度不断增大;最佳烧结温度为1250℃,最佳保温时间为30 min.在最佳烧结工艺条件下,制备得到高孔隙率陶瓷,孔结构单一且孔径分布较窄,平均孔径大约为12.41μm. |
| 关 键 词： | 多孔陶瓷 烧结温度 保温时间 孔隙率 断裂强度 |
INFLUENCE OF SINTERING PROCESS ON PROPERTY OF POROUS CERAMICS FROM QUARTZ SAND |
|
| Zhu Sujuan,Chen Yong,Xiao Weilong,Zhang Haitao,Deng Xiangyun,Li Jianbao,Qiu Wenda,Zhang Wen.INFLUENCE OF SINTERING PROCESS ON PROPERTY OF POROUS CERAMICS FROM QUARTZ SAND[J].Journal of Ceramics,2011,32(1). | |
| Authors: | Zhu Sujuan Chen Yong Xiao Weilong Zhang Haitao Deng Xiangyun Li Jianbao Qiu Wenda Zhang Wen |
| Affiliation: | Zhu Sujuan 1 Chen Yong 1 Xiao Weilong 1 Zhang Haitao 1 Deng Xiangyun 1,2 Li Jianbao 1,3 Qiu Wenda 1 Zhang Wen 1(1.Key Laboratory of Ministry of Education for Application Technology of Chemical Materials in Hainan Superior Resources and Hainan Provincial Key Laboratory of Research on Utilization of Si-Zr-Ti Resources.Materials and Chemical Engineering Institute,Hainan University,Haikou Hainan 570228,China,2.College of Physics and Electronic Information,Tianjin Normal University,Tianjin 300387,3.Departm... |
| Abstract: | Porous ceramics were prepared by means of dry pressing and liquid-phase sintering,using quartz sand as main materials.Scanning electronic microscopy(SEM) was employed to characterize the microstructure of porous ceramics.The effects of sintering process(sintering temperature and holding time) on the performance(porosity and breaking strength) of porous ceramics were investigated.The results show that the porosity decreased while the breaking strength increased with the increasing of the sintering temperatur... |
| Keywords: | porous ceramics sintering temperature holding time porosity breaking strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |