Effect of zinc doping and temperature on the properties of sprayed CuInS2 thin films

Copper indium disulfide (CuInS₂) is an efficient absorber material for photovoltaic and solar cell applications. The structural, optical, photoluminescence properties and electrical conductivities could be controlled and modified by suitably doping CuInS₂ thin films with dopants such as Zn, Sn, Bi, Cd, Na, N, O, P and As. In this work Zn (0.01 M) doped CuInS₂ thin films are (Cu/In=1.25) deposited on to glass substrates in the temperature range 300–400 °C. It is observed that the film growth temperature, ion ratio (Cu/In=1.25) and Zn-doping affect structural, optical, photoluminescence and electrical properties of sprayed CuInS₂ thin films. As the XRD patterns depict, Zn-doping facilitates the growth of CuInS₂ thin films along (112) preferred plane and in other characteristic planes. The EDAX results confirm the presence of Cu, In, S and Zn in the films. The optical studies show, about 90% of light transmission occurs in the IR regions; hence Zn-doped CuInS₂ can be used as an IR transmitter. The absorption coefficient (α) in the UV–visible region is found to be in the order of 10⁴–10⁵ cm^?1 which is the optimum value for an efficient absorber. The optical band gap energies increase with increase of temperatures (1.66–1.78 eV). SEM photographs reveal crystalline and amorphous nature of the films at various temperature ranges. Photoluminescence study shows that well defined broad Blue and Green band emissions are exhibited by Zn-doped CuInS₂ thin films. All the films present low resistivity (ρ) values and exhibit semiconducting nature. An evolution of p-type to n-type conductivity is obtained in the temperature range 325–350 °C. Hence, Zn species can be used as a donor and acceptor impurity in CuInS₂ thin films to fabricate efficient solar cells, photovoltaic devices and good IR Transmitters.