| 易切削钢方坯凹陷原因分析及控制 |
| |
| 引用本文： | 张志明,谢杰智,敖永明,万翔,韦乾永. 易切削钢方坯凹陷原因分析及控制[J]. 连铸, 2019, 38(1): 22-27. DOI: 10. 13228/j. boyuan. issn1005-4006.20180068 |
| |
| 作者姓名： | 张志明 谢杰智 敖永明 万翔 韦乾永 |
| |
| 作者单位： | 宝武集团广东韶关钢铁有限公司， 广东 韶关 512123 |
| |
| 摘 要： | 对1215MS牌号易切削钢坯表面凹陷缺陷,采用抛丸、酸洗、金相、电子探针和能谱仪检测分析凹陷的特征,结合生产实践,研究分析凹陷产生原因及影响因素。试验研究表明,结晶器采用高振频、低振幅的正弦振动方式,降低结晶器冷却强度,提高二次冷却的均匀性,抑制坯壳过早收缩,优化保护渣性能,降低渣的黏度,提高浸入式水口对中精度,能够有效控制1215MS钢坯凹陷发生。
|
| 关 键 词： | 低碳高硫易切削钢 方坯 凹陷 结晶器 保护渣 |
Control and analysis of causes of indentations on billets of free cutting steel |
| |
| ZHANG Zhi-ming,XIE Jie-zhi,AO Yong-ming,WAN Xiang,WEI Qian-yong. Control and analysis of causes of indentations on billets of free cutting steel[J]. CONTINUOUS CASTING, 2019, 38(1): 22-27. DOI: 10. 13228/j. boyuan. issn1005-4006.20180068 |
| |
| Authors: | ZHANG Zhi-ming XIE Jie-zhi AO Yong-ming WAN Xiang WEI Qian-yong |
| |
| Affiliation: | （Shaoguan Iron and Steel Co.， Ltd.， BAOWU Group， Shaoguan 512123， Guangdong， China） |
| |
| Abstract: | For the surface indentations on billet of the 1215MS free-cutting steel， the characteristics of the indentation were detected by shot blasting， pickling， metallographic analysis， electron probe and energy spectrometer. Combined with the production practice， the causes and influence factors of the indentation were studied. The experimental research shows that the indentation can be improved effectively and avoided by adopting sinusoidal vibration with high frequency and low amplitude for the mold， reducing the mold cooling rate， restraining constriction of billet shell early， optimizing the properties of mold lubricant， reducing the viscosity of slag， increasing the accuracy of SEN， and promoting the homogeneity of secondary cooling. |
| |
| Keywords: | low-carbon high-sulphur free cutting steel billet indentation mold mold lubricant |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《连铸》浏览原始摘要信息 |
|
点击此处可从《连铸》下载全文 |
|
