| 基于最优生产技术的ERP 作业计划编制方法的研究 |
| |
| 引用本文： | 朱华锋,谭建荣,李涛. 基于最优生产技术的ERP 作业计划编制方法的研究[J]. 中国机械工程, 2005, 16(7): 594-597 |
| |
| 作者姓名： | 朱华锋 谭建荣 李涛 |
| |
| 作者单位： | 浙江大学CAD&CG国家重点实验室,杭州,310027 |
| |
| 基金项目： | 国家863高技术研究发展计划资助项目(863-511-910-211) |
| |
| 摘 要： | 结合最优生产技术(OPT)与ERP的特长，提出了基于OPT的ERP作业计划编制方法，将计划编制划分为预编制、冲突判断、关键作业计划编制等环节；同时，对关键技术如工作中心任务分解、关键工序前后作业时间给出了数学推导公式；结合应用实例，对基于OPT的ERP作业计划编制方法进行了有效性验证。
|
| 关 键 词： | 最优生产技术（OPT） ERP 作业计划编制 工作中心 |
| 文章编号： | 1004-132X(2005)07-0594-04 |
Research on ERP Shop Job Scheduling Method Based on OPT |
| |
| Zhu Huafeng,Tan Jianrong,Li Tao. Research on ERP Shop Job Scheduling Method Based on OPT[J]. China Mechanical Engineering, 2005, 16(7): 594-597 |
| |
| Authors: | Zhu Huafeng Tan Jianrong Li Tao |
| |
| Affiliation: | Zhu Huafeng Tan Jianrong Li Tao State Key Lab of CAD&CG,Zhejiang University,Hangzhou,310027 |
| |
| Abstract: | Combining merits of optimized production technology(OPT) and ERP, we developed a new ERP Shop Job scheduling method based on OPT.In this method, the job scheduling was divided into several parts such as pre-scheduling, judgment of conflict, job scheduling of key shop etc. At the same time, mathematic formulae were established for key techniques like decomposition of work center, fore-and-aft times of key shop. In the end, the validity of this method was tested in practice. |
| |
| Keywords: | optimized production technology(OPT) ERP shop job scheduling work center |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
