|
|||||
|
|
| 聚甲醛/低密度聚乙烯接枝纳米二氧化硅复合材料的研究 | |
| 引用本文： | 宋芳,姜立忠,苏瞧忠. 聚甲醛/低密度聚乙烯接枝纳米二氧化硅复合材料的研究[J]. 工程塑料应用, 2012, 40(6): 32-35 |
| 作者姓名： | 宋芳 姜立忠 苏瞧忠 |
| 作者单位： | 1. 天津市口腔医院,天津,300041 2. 中国化工集团公司,北京,101318 3. 湖南省平江县职业技术学校,平江,414500 |
| 摘 要： | 通过熔融接枝及熔融共混法制备了聚甲醛/低密度聚乙烯接枝纳米二氧化硅(POM/PE-LD-g-SiO2)复合材料,并对复合材料的力学、热和摩擦磨损性能进行研究。结果表明,PE-LD-g-SiO2的加入对POM基体具有良好的增强增韧作用,且随着PE-LD-g-SiO2含量的增加复合材料的力学和热性能均呈现先增大后降低的趋势。当PE-LD-g-SiO2的质量分数为4%时,复合材料的力学和热性能均达到最大值;而摩擦系数和体积磨损量逐渐降低,当PE-LD-g-SiO2的质量分数为6%时,达到最小值。 |
| 关 键 词： | 聚甲醛 二氧化硅 低密度聚乙烯 |
Study on Polyoxymethylene/PE-LD Melt Grafted Silica Nanoparticle Composite |
|
| Song Fang , Jiang Lizhong , Su Qiaozhong. Study on Polyoxymethylene/PE-LD Melt Grafted Silica Nanoparticle Composite[J]. Engineering Plastics Application, 2012, 40(6): 32-35 | |
| Authors: | Song Fang Jiang Lizhong Su Qiaozhong |
| Affiliation: | 1.Tianjin Stomatological Hospital,Tianjin 300041,China;2.China National Chemical Corporation,Beijing 101318,China;3.The Pingjiang Hunan Votech School,Pingjiang 414500,China) |
| Abstract: | Polyoxymethylene(POM)/low density polyethylene garfted nano-SiO2(PE-LD-g-SiO2) composites were successfully prepared with melt-grafting and melt-blending.Mechanical,thermal and friction/wear properties of the composites were studied.The results demonstrated that the strength and toughness of the composites were improved by the induction of PE-LD-g-SiO2.The mechanical and thermal properties of the composites increased first and then decreased with the content of PE-LD-g-SiO2increasing and these reached a maximum when the mass fraction of PE-LD-g-SiO2 was 4%.The frication/wear properties of the composites decreased with the content of PE-LD-g-SiO2 increasing while the coefficient of friction and the volume of wear reach a minimum when the mass fraction of PE-LD-g-SiO2was 6%. |
| Keywords: | polyoxymethylene silica low density polyethylene |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |