| 不同热处理制度对2A16铝合金显微组织和性能的影响 |
| |
| 引用本文： | 邓鹏辉,张世兴,吴海宏,王成龙. 不同热处理制度对2A16铝合金显微组织和性能的影响[J]. 新技术新工艺, 2009, 0(9): 119-120 |
| |
| 作者姓名： | 邓鹏辉 张世兴 吴海宏 王成龙 |
| |
| 作者单位： | 河南工业大学,机电工程学院,河南,郑州,450007 |
| |
| 基金项目： | 河南省郑州市科技攻关基金 |
| |
| 摘 要： | 本文研究了2A16铝合金固溶处理后单级时效热处理工艺，分析了不同单级时效热处理工艺对2A16铝合金显微组织和硬度的影响。结果表明，在经过525℃×10min固溶后，150℃±5℃×6h单级时效时能获得较好的综合性能，为2A16铝合金时效热处理工艺参数的确定及优化提供参考依据。
|
| 关 键 词： | 2A16铝合金 单级时效 显微组织 硬度 |
Influence of Different Heat Treatment Processes on Microstructure and Mechanical Properties of 2A16 Aluminum Alloy |
| |
| DENG Penghui,ZHANG Shixing,WU Haihong,WANG Chenglong. Influence of Different Heat Treatment Processes on Microstructure and Mechanical Properties of 2A16 Aluminum Alloy[J]. New Technology & New Process, 2009, 0(9): 119-120 |
| |
| Authors: | DENG Penghui ZHANG Shixing WU Haihong WANG Chenglong |
| |
| Affiliation: | (College of Mechanical and Electronieal Engineering, Henan University of Technology,Zhengzhou 450007,China) |
| |
| Abstract: | In this paper the heat-treatment process of single-grade aging after solution heat treatment on aluminum alloy was researched and the influences of different single-grade aging heat treatment processes on the microstructure and hardness of the 2A16 aluminum alloy were analyzed. The results show that the optimal mechanical properties can be obtained with the single-grade aging at the conditions of 150 ℃±5 ℃ ×6 h after solution heat treated for 525 ℃ × 10 min,which can provide an evidence for the identification and optimization of parameters of aging heat-treatment process of the 2A16. |
| |
| Keywords: | 2 A16 aluminum alloy Single-grade aging Microstructure Hardness |
| 本文献已被 维普 万方数据 等数据库收录！ |
