Investigation of Bending Trainings, Transformation Temperatures, and Stability of Two-Way Shape Memory Effect in NiTi-Based Ribbons

This paper discusses the application of rapid solidification by the melt-spinning method for the preparation of thin NiTi-based ribbons. Generally, the application of rapid solidification via melt-spinning can change the microstructure, improving the ductility and shape memory characteristics and lead to small-dimensioned samples. Several thousand thermal cycles were performed on the trained ribbons using bending deformation procedure, continuously observing the changes in the shape memory and transformation behaviors. These changes are due to the appearance of an intermediate phase which was stabilized probably by the accumulation of defects introduced by thermomechanical training. The influence of training and thermal cycling on characteristics of ribbons was studied by x-ray diffraction and transmission electron microscopy and differential scanning calorimetry. The results displayed that bending training methods were useful in developing a two-way shape memory effect (TWSME). All samples show a shape memory effect immediately after processing without further heat treatment. The addition of copper in NiTi alloys was effective to narrow the transformation hysteresis. The W addition has improved the stability of the TWSME and mechanical properties. The TWSME of ribbons and its stability are well suited for important applications such as microsensors and microactuators.