| 复合层对Al接触反应钎焊过程及接头性能的影响 |
| |
| 引用本文： | 殷世强,邱小明,孙大谦.复合层对Al接触反应钎焊过程及接头性能的影响[J].中国有色金属学报,2002,12(2):323-326. |
| |
| 作者姓名： | 殷世强 邱小明 孙大谦 |
| |
| 作者单位： | 吉林大学,材料科学与工程学院,长春,130025 |
| |
| 基金项目： | 吉林省科技发展基金资助项目(960909) |
| |
| 摘 要： | 研究了Cu ,Zn复合层对Al接触反应钎焊过程和接头质量的影响规律。Cu和Al形成共晶液相破坏了Al表面氧化膜 ,促使Cu Zn包晶液相和Al Zn Cu共晶液相在Al表面润湿。结果表明 ,采用复合层进行Al接触共晶反应钎焊时 ,Cu和Zn厚度比例合适 ,可提高钎焊接头的抗电化学腐蚀性能和接头强度
|
| 关 键 词： | Al钎焊 共晶反应 复合层 |
| 文章编号： | 1004-0609(2002)02-0323-04 |
| 修稿时间： | 2001年6月4日 |
Effect of compound layer on process and joint properties of Al contact eutectic reaction brazing |
| |
| YIN Shi qiang,QIU Xiao ming,SUN Da qian.Effect of compound layer on process and joint properties of Al contact eutectic reaction brazing[J].The Chinese Journal of Nonferrous Metals,2002,12(2):323-326. |
| |
| Authors: | YIN Shi qiang QIU Xiao ming SUN Da qian |
| |
| Abstract: | The effects of Cu Zn compound layer on the process and joint properties of the Al contacting eutectic reaction brazing were studied.Cu Al eutectic liquid phase can effectively destroy the Al oxide film on the parent metal, and Cu Zn liquid phase and Al Zn Cu eutectic liquid phase can wet in the surface of the Al parent metal. The results show that, in Al contacting eutectic reaction brazing with Cu Zn as compound layer, when the thickness proportion of Zn to Cu is appropriate, the electrochemical corrosion resistance and strength of the joint can be improved. |
| |
| Keywords: | aluminium brazing eutectic reaction compound layer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
