中高温条件下激光冲击处理Ti-6Al-4V表面完整性变化 |
| |
引用本文: | 侯丽华,任旭东,周王凡,戴文杰,徐士东,黄晶晶.中高温条件下激光冲击处理Ti-6Al-4V表面完整性变化[J].激光技术,2016,40(2):288-291. |
| |
作者姓名: | 侯丽华 任旭东 周王凡 戴文杰 徐士东 黄晶晶 |
| |
作者单位: | 1.江苏大学机械工程学院, 镇江 212013 |
| |
摘 要: | 为了研究中高温条件下激光冲击处理对Ti-6Al-4V钛合金的表面完整性的影响,采用高功率、短脉冲Nd:YAG激光器对Ti-6Al-4V钛合金表面进行激光冲击,并将冲击后的钛合金试样分别置于400℃,500℃,550℃和600℃的温度下进行保温处理。从表面形貌、表面粗糙度、表面残余应力等方面分析了中高温条件下激光冲击处理对Ti-6Al-4V钛合金的表面完整性的影响。结果表明,激光冲击处理增大了Ti-6Al-4V钛合金的表面粗糙度,且热处理温度越高,Ti-6Al-4V钛合金的表面粗糙度越大;激光冲击处理显著提高了Ti-6Al-4V钛合金材料的表面残余压应力,随着温度的升高,残余压应力值降低。研究结果对了解和掌握Ti-6Al-4V钛合金的使用性能是有帮助的。
|
关 键 词: | 激光技术 表面完整性 中高温 Ti-6Al-4V钛合金 |
收稿时间: | 2015-01-22 |
Change of surface integrity of Ti-6Al-4V titanium alloy by laser shock processing at middle and high temperatures |
| |
Abstract: | In order to study effect of laser shock processing ( LSP) on surface integrity of Ti-6Al-4V titanium alloy at middle and high temperatures, a high power short pulse Nd:YAG laser was used to shock the surface of Ti-6Al-4V titanium alloy.And then, the specimens after LSP were held at 400℃, 500℃, 550℃and 600℃respectively for one hour .The influence of LSP on surface integrity of Ti-6Al-4V titanium alloy at middle and high temperatures were analyzed from surface morphology , surface roughness and surface residual stress .The results indicate that LSP increases the surface roughness of Ti-6Al-4V titanium alloy. The surface roughness increases with the increase of heat treatment temperature .The surface residual stress of Ti-6Al-4V titanium alloy increases obviously after LSP .The higher the temperature , the smaller the surface residual stress is .The research results are helpful for understanding the performance of Ti-6Al-4V titanium alloy. |
| |
Keywords: | laser technique surface integrity middle and high temperatures Ti-6Al-4V titanium alloy |
本文献已被 万方数据 等数据库收录! |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|