| 刚架结构体系可靠度分析与优化方法 |
| |
| 引用本文： | 黄刚,刘幸. 刚架结构体系可靠度分析与优化方法[J]. 武汉大学学报(工学版), 2004, 37(3): 66-69 |
| |
| 作者姓名： | 黄刚 刘幸 |
| |
| 作者单位： | 武汉大学土木建筑工程学院,湖北,武汉,430072 |
| |
| 摘 要： | 以结构体系的可靠度指标作为结构优化设计的控制参数.首先利用分支 界约法寻找结构的主要失效模式,同时采用条件概率法求解结构体系可靠度指标并给出了结构体系可靠度的敏度表达式.然后采用最佳矢量法求解结构体系可靠度指标约束下的最小重量优化设计问题.最后给出了平面刚架计算实例,计算结果表明了方法的有效性,该法也可推广用于空间结构.
|
| 关 键 词： | 结构体系 可靠度 敏度 优化设计 |
| 文章编号： | 1671-8844(2004)03-066-04 |
| 修稿时间： | 2002-12-26 |
Reliability analysis and optimization design for rigid framed structure system |
| |
| HUANG Gang,LIU Xing. Reliability analysis and optimization design for rigid framed structure system[J]. Engineering Journal of Wuhan University, 2004, 37(3): 66-69 |
| |
| Authors: | HUANG Gang LIU Xing |
| |
| Abstract: | The structural system reliability is taken as control parameter for structural optimization design. Firstly, the significant failure modes of structures are identified by using the branch-bound method while structural system reliability is evaluated by conditional probability method, from which expression of sensitivity analysis for the structure system reliability is resulted. Secondly, the problem of the minimum weight design is resolved by using the optimum vector algorithm under the constraint of the structure system reliability. Finally, as an example, a plane rigid frame is analysed to show the efficiency of the proposed method which can also be used for space structure. |
| |
| Keywords: | structural system reliability sensitivity optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
