| 多孔玻璃粉的制备及其在玻璃基板上的粘接 |
| |
| 引用本文： | 任媛媛,韩建军,毛雨,袁启华,赵修建.多孔玻璃粉的制备及其在玻璃基板上的粘接[J].材料科学与工程学报,2012,30(1):89-92,127. |
| |
| 作者姓名： | 任媛媛 韩建军 毛雨 袁启华 赵修建 |
| |
| 作者单位： | 武汉理工大学硅酸盐建筑材料国家重点实验室,湖北武汉,430070 |
| |
| 基金项目： | 新世纪优秀人才支持计划资助项目，973计划前期研究专项资助项目 |
| |
| 摘 要： | 利用硼硅酸盐玻璃的分相和酸侵蚀制备了孔径可控的多孔玻璃粉,采用SEM、BET等测试手段对玻璃的表面形貌和孔径分布进行了表征。并以Na2O-Al2O3-B2O3体系低熔点玻璃作为粘接剂将多孔玻璃粉烧结在普通玻璃板上,研制出一种表面孔径约50nm且均匀分布的多孔玻璃基板,并分析了烧结温度、烧结时间、颗粒大小等对粘接的影响。
|
| 关 键 词： | 多孔玻璃粉 热处理条件 低熔点玻璃 粘接 |
Preparation of Porous Glass Powder and its Adhesion with Glass Substrate |
| |
| REN Yuan-yuan,HAN Jian-jun,MAO Yu,YUAN Qi-hua,ZHAO Xiu-jian.Preparation of Porous Glass Powder and its Adhesion with Glass Substrate[J].Journal of Materials Science and Engineering,2012,30(1):89-92,127. |
| |
| Authors: | REN Yuan-yuan HAN Jian-jun MAO Yu YUAN Qi-hua ZHAO Xiu-jian |
| |
| Affiliation: | (State Key Laboratory of Silicate Materials for Architectures(Wuhan University of Technology),Wuhan 430070,China) |
| |
| Abstract: | Porous glass powder with controlled pore size was prepared from the sodium borosilicate glass by heat treatment and subsequently acid leaching.Scanning electron microscopy(SEM) and Brunauer-Emmett-Teller(BET) analysis were used to investigate the surface morphology and the pore size distribution of the porous glass,respectively.Then a porous glass substrate with evenly distributed pore size(about 50nm) was prepared by adhering the porous glass powder with a Na2O-Al2O3-B2O3-based low melting glass.The effects of treating temperature,treating time and particle size on the adhesion were also studied. |
| |
| Keywords: | porous glass powder heat-treatment low melting glass adhesion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
