首页 | 本学科首页   官方微博 | 高级检索  
     

一种LED均匀照明的透镜设计
引用本文:王晶,张宁,徐熙平,乔杨.一种LED均匀照明的透镜设计[J].长春理工大学学报,2015(2):29-31.
作者姓名:王晶  张宁  徐熙平  乔杨
作者单位:长春理工大学 光电工程学院,长春,130000
摘    要:由于LED发射光强的逐渐提高,许多照明系统使用单颗LED作为光源就可以满足不同场合的需求。通过对LED的发光特性的分析,提出了一种以单颗LED作为光源的均匀照明透镜的设计。首先由Snell定律和能量守恒定律构建出满足设计条件的透镜的数学方程,运用MATLAB进行编程解出该方程,再使用Pro/E对求解出的坐标点进行拟合来得到透镜模型,最后用TracePro将得到的透镜模型进行光线追击,通过得到的照度图可知最终达到在规定区域内均匀照明的需求。

关 键 词:应用光学  LED照明  照明均匀性  朗伯光源

A Lens Design for LED Uniform Illumination
WANG Jing,ZHANG Ning,XU Xiping,QIAO Yang.A Lens Design for LED Uniform Illumination[J].Journal of Changchun University of Science and Technology,2015(2):29-31.
Authors:WANG Jing  ZHANG Ning  XU Xiping  QIAO Yang
Affiliation:WANG Jing;ZHANG Ning;XU Xiping;QIAO Yang;School of Optoelectronic Engineering,Changchun University of Science and Technology;
Abstract:With the increasing of emission intensity of LED, illumination system with a single LED light source can meet requirements in many fields. According to the characteristics of LED source, a method of lens design of LED uniform illumination was proposed. At first,a lens design equation by Snell's law and the law of conservation of ener-gy was formulated;and the result of the equation was solved by MATLAB. Then the profile curves were acquired by curve fitting of the coordinate spots with software Pro/E;so the lens model could be got. At last,the lens model was introduced into TracePro and rays were traced. Finally the uniform illumination at target area was obtained.
Keywords:applied optics  LED lighting  lighting uniformity  Lambert source
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号